Highly selective and sensitive methanol gas sensor based on molecular imprinted silver-doped LaFeO3 core–shell and cage structures

Abstract

Silver-doped LaFeO3 molecularly imprinted polymers (SLMIPs) were synthesized by a sol–gel method combined with molecularly imprinted technology as precursors. The precursors were then used to prepare SLMIPs cage (SLM-cage) and SLMIPs core–shell (SLM-core–shell) structures by using a carbon sphere as the template and hydrothermal synthesis, respectively. The structures, morphologies, and surface areas of these materials were determined, as well as their gas-sensing properties and related mechanisms. The SLM-cage and SLM-core–shell samples exhibited good responses to methanol gas, with excellent selectivity. The response and optimum working temperature were 16.98 °C and 215 °C, 33.7 °C and 195 °C, respectively, with corresponding response and recovery times of 45 and 50 s (SLM-cage) and 42 and 57 s (SLM-core–shell) for 5 ppm methanol gas. Notably, the SLM-cage and SLM-core–shell samples exhibited lower responses (≤5 and ≤7, respectively) to other gases, including ethanol, ammonia, benzene, acetone, and toluene. Thus, these materials show potential as practical methanol detectors.