Abstract

In this work, we applied a hydrophilicity-enhanced solid substrate and an alternating laser-ablation data sampling (ALADS) scheme to improve laser-induced breakdown spectroscopy (LIBS) measurement precision and demonstrated the performance in analyzing K, Mg, Ca, and S contained in commercially available edible salt products. Five edible salt products from Australia, Bolivia, France, and South Korea were dissolved in water and a tiny volume of each solution was dropped on the solid substrate, that is, a miniaturized salt pond. After being dried, the residual salt crystals distributed still inhomogeneously, but the homogeneity could be significantly improved in comparison with that from typical drop-and-dry methods. The ALADS scheme was applied to extract three precise measurements from 9798 single-shot LIBS spectra covering the entire salt pond. The measurements obtained by ALADS were found to agree well with one another regardless of the inhomogeneous distribution of salt crystals. As a result, the measurement precision was proved remarkably. Limits of detection for K, Mg, Ca, and S were estimated to be 0.64, 1.7, 14, and 530 mg/kg, respectively, which are enough to analyze those elements contained in salts typically at the level of 100 parts per million (ppm) to ∼3 wt% for the purpose of salt quality assessment.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call