Abstract
Herein, we report the synthesis and electrochemical performance of the porous carbon produced from the bio-waste of the yellow mustard seed plant by the chemical activation process. We have optimized the chemical process to produce mesoporous activated carbon structure with a high specific surface area of 563 m2/g. The N2-sorption analysis confirms the presence of mesoporous structure of the activated carbon. The nanometer scale porosity and chemical composition of the activated carbon was investigated by transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDX). The crystallinity and defects analyses were conducted using XRD and Raman spectroscopy, revealing the existence of both amorphous and crystalline phases of the porous activated carbon. The electrochemical double-layered capacitor (EDLC) of the activated carbon electrodes was monitored for long-cycling. The galvanostatic charge-discharge (GCD) studies reveal a significantly high-specific capacity of 198 F/g at a current density of 0.25 A/g. In addition, the cyclic voltammetry (CV) measurements deliver a high reversible capacitive behavior and cyclic stability up to 2100 cycles. Furthermore, we observed a low value of equivalent series resistance (ESR) and charge transfer resistance, indicating an excellent electrode/electrolyte interface which can reversibly facilitate the electrolyte ion transport across the electrodes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.