Highly Permeable Skin Patch with Conductive Hierarchical Architectures Inspired by Amphibians and Octopi for Omnidirectionally Enhanced Wet Adhesion

Abstract

AbstractAmphibian adhesion systems can enhance adhesion forces on wet or rough surfaces via hexagonal architectures, enabling omnidirectional peel resistance and drainage against wet and rough surfaces, often under flowing water. In addition, an octopus has versatile suction cups with convex cup structures located inside the suction chambers for strong adhesion in various dry and wet conditions. Highly air‐permeable, water‐drainable, and reusable skin patches with enhanced pulling adhesion and omnidirectional peel resistance, inspired by the microchannel network in the toe pads of tree frogs and convex cups in the suckers of octopi, are presented. By investigating various geometric parameters of microchannels on the adhesive surface, a simple model to maximize peeling strength via a time‐dependent zig‐zag profile and an arresting effect against crack propagation is first developed. Octopus‐like convex cups are employed on the top surfaces of the hexagonal structures to improve adhesion on skin in sweaty and even flowing water conditions. The amount of reduced graphene oxide nanoplatelets coated on the frog and octopus‐inspired hierarchical architectures is controlled to utilize the patches as flexible electrodes which can monitor electrocardiography signals without delamination from wet skin under motion.