Abstract
Flexible sensors for large strain detection have recently been attracted the attention of researchers. This investigation reports a stretchable strain sensor in which carbon nanotubes (CNTs) were diffused into polydimethylsiloxane (PDMS) using a facile swelling/permeating method. The CNTs were further modified by using a silane coupling agent (SCA) to improve dispersion and the interaction between CNTs and PDMS. The CNTs permeated the skin layer of the PDMS composite and the inner core of PDMS contained few CNTs, forming a sandwich-like structure. The low CNTs content (0.48 wt%) and sandwich-like structure resulted in excellent composite flexibility which allowed work strains to exceed 350% and Young's modulus to increase from 0.25 MPa to 0.40 MPa. Surface modification of the CNTs improved their permeation depth and dispersion, which was shown to enhance composite sensitivity. The relative resistance change reached 4850% with a gauge factor of 20 by 1.0 wt% SCA modification. Cycled electromechanical properties showed a stable resistance response and sensitivity against strain. Therefore, the PDMS/CNTs nanocomposites prepared by swelling/permeating and CNTs surface modification in this study have various application potentials in the flexible sensor field.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.