Highly Flexible and Transparent Single Wall Carbon Nanotube Network Gas Sensors Fabricated on PDMS Substrates

Abstract

AbstractWe report on the basic characteristics and gas sensing operation of density controlled single-walled carbon nanotube (SWCNT) thin films on poly(dimethyl siloxane) (PDMS) substrates The vacuum filteration and PDMS mold transfer method allowed the density of SWCNT distributed to have non-local uniformity. The optical transparency of the SWCNT thin films was inversely proportional to SWCNT density and conductivity. The flexible SWCNT thin film showed high mechanical stability with negligible change in conductance after being bent by 180o. We evaluated its gas sensing operation depending on SWCNT density and bias voltage. It was shown that lower SWCNT density thin films had higher sensitivity to NH3 gas, which may be due to higher exposed surface area for lower density SWCNT thin films. Also, we found that lower bias voltage devices showed faster recovery times. The results show that vacuum filteration and mold transfer method produced flexible SWCNT thin films that have stable mechanical and electrical characteristics and also stable gas sensing capabilities making them applicable to future flexible integrated sensors.