Abstract
A nano-sized Si anode material was synthesized by a novel and highly efficient route of ball-milling assisted low-temperature aluminothermic reduction at 150–180 °C in a eutectic NaCl/KCl/AlCl3 mixture, using white carbon black and coarse-grained Al powder as the starting materials. After extending the duration of ball-milling assisted aluminothermic reduction to 10 h, the obtained Si yield reached as high as 94%. The synthesized nano-Si mainly consisted of irregular porous agglomerates constructed by ultrafine primary particles with a particle size less than 50 nm. The nano-Si anode showed a superior electrochemical performance. Its maximum discharge and charge capacities at a current density of 0.05 A g−1 were 3075 and 2597 mAh g−1, respectively, leading to a high initial Coulumbic efficiency of 84.5%. The nano-Si anode exhibited reversible capacities of 2458 mAh g−1 at 0.2 A g−1, and of 1169 mAh g−1 at a high current density of 5 A g−1. After cycling at 1 A g−1 for 400 cycles, it still delivered a high reversible capacity of 804 mAh g−1. The synthetic strategy, which is not only facile and highly efficient, but also low-cost and environmentally benign, is thus promising to be applied for mass production of nano-Si anode materials for next-generation Li-ion batteries.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.