Abstract
A series of mesoporous nickel catalysts with different molar ratios of citric acid and nickel nitrate were synthesized via a simple two-step method by solid-state grinding and in-situ reduction; these catalysts were further employed for the catalytic transfer hydrogenation of levulinate esters to γ-valerolactone (GVL) with 2-propanol as the hydrogen donor. The effects of C6H8O7/Ni molar ratios, catalyst dosage, reaction temperature and time on the catalytic performance were investigated. An excellent GVL selectivity of 99.1% and an ethyl levulinate (EL) conversion of 100% could be achieved at 180 °C in 6 h over Ni-1.0 catalyst with a 1.0:1 M ratio of C6H8O7/Ni. The characterization results showed that the Ni-1.0 catalyst was composed of mesoporous metallic Ni bulk and a surface Ni–NiO composite, and the acid sites of NiO played a synergistic catalytic role in producing GVL from EL. The superior mesoporous structure and large surface area of Ni-1.0 increased the atomic utilization rate of nickel metallic active centers. Moreover, Ni-1.0 catalyst could be easily separated and reused ten times, with an EL conversion above 95% remaining in each recycle. This work provids a highly efficient and environmentally friendly catalytic procedure for the conversion of biomass into GVL, a fuel additive compound.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.