Highly efficient removal of arsenate and arsenite with potassium ferrate: role of in situ formed ferric nanoparticle.

Abstract

It is well known the capacity of potassium ferrate (Fe(VI)) for the oxidation of pollutants or co-precipitation and adsorption of hazardous species. However, little information has been paid on the adsorption and co-precipitation contribution of the Fe(VI) resultant nanoparticles, the in situ hydrolytic ferric iron oxides. Here, the removal of arsenate (As(V)) and arsenite (As(III)) by Fe(VI) was investigated, which focused on the interaction mechanisms of Fe(VI) with arsenic, especially in the contribution of the co-precipitation and adsorption of its hydrolytic ferric iron oxides. pH and Fe(VI) played significant roles on arsenic removal; over 97.8% and 98.1% of As(V) and As(III) removal were observed when Fe(VI):As(V) and Fe(VI):As(III) were 24:1 and 16:1 at pH 4, respectively. The removal of As(V) and As(III) by in situ and ex situ formed hydrolytic ferric iron oxides was examined respectively. The results revealed that As(III) was oxidized by Fe(VI) to As(V), and then was removed though co-precipitation and adsorption by the hydrolytic ferric iron oxides with the contribution content was about 1:3. For As(V), it could be removed directly by the in situ formed particles from Fe(VI) through co-precipitation and adsorption with the contribution content was about 1:1.5. By comparison, As(III) and As(V) were mainly removed through adsorption by the 30-min hydrolytic ferric iron oxides during the ex situ process. The hydrolytic ferric iron oxides size was obviously different in the process of in situ and ex situ, possessing abundant and multiple morphological structures ferric oxides, which was conducive for the efficient removal of arsenic. This study would provide a new perspective for understanding the potential of Fe(VI) treatment on arsenic control.