Abstract

Abstract Tip-based plasmonic nanofocusing, which delivers light into a nanoscale region and achieves localized electromagnetic (EM) field enhancement beyond the diffraction limit, is highly desired for light-matter interaction-based super-resolution imaging. Here, we present the plasmonic nanofocusing at the apex of a silver (Ag)-coated fiber tip with the internal illumination of a radial vector mode (RVM) generated directly in an optical fiber based on an acoustically-induced fiber grating (AIFG). As illustrated by theoretical calculation, a picture of the nanofocusing plasmonic tip given by analyzing the mode conversion process that the surface plasmon polariton (SPP) mode excited via the radial polarization optical mode can propagate to the apex of the plasmonic tip for nanofocusing because it is not cut off as the tip radius decreases; while the SPP mode which transited from the linear polarization optical mode cannot propagate to the tip apex for nanofocusing because it is cut off as the tip radius decreases. The electric field intensity enhancement factor | E apex 2 | / | E input 2 | $|{\rm{E}}_{{\rm{apex}}}^{\rm{2}}|/|{\rm{E}}_{{\rm{input}}}^{\rm{2}}|$ of a plasmonic tip with a tip radius of 20 nm was calculated to be ~2 × 103. Furthermore, the electric field enhancement characteristic at the tip apex was also experimentally verified by using surface-enhanced Raman spectroscopy (SERS). The Raman scattering intensity was observed to be ~15 times as strong as that with internal illumination using the linear polarization mode (LPM), revealing their significantly different nanofocusing characteristics. A Raman sensitivity of 10−14 m was achieved for the target analyte of malachite green (MG), denoting significant electric field enhancement and effective plasmonic nanofocusing. The energy conversion efficiency of the radial polarization optical mode to the corresponding SPP mode at the tip apex was measured to be ~17%. This light delivery technique can be potentially further exploited in near-field microscopy with improved resolution and conversion efficiency.

Highlights

  • Nanoscience has been driven by rapid progress in plasmonics due to its sub-diffraction limit characteristics

  • The linear polarization mode (LPM) (HEO11M) and radial vector mode (RVM) (TMO01M) in the optical fiber can be used to excite the corresponding SPP modes (HES11PP and TMS0P1P) that are localized at the metal-air interface of the tip [42]

  • We present the plasmonic nanofocusing at apex of the Ag-coated fiber tip with internal illumination of RVM directly generated in few-mode fiber (FMF) by using acoustically-induced fiber grating (AIFG)

Read more

Summary

Introduction

Nanoscience has been driven by rapid progress in plasmonics due to its sub-diffraction limit characteristics. With the development of nanoscience, tip-based plasmonic nanofocusing to achieve localized electromagnetic (EM) field enhancement within nanoscale [1] has been widely demanded in areas of super-resolution near-field microscopy [2] for ultrafast nanoimaging [3–5], chemical imaging [6, 7], biophotonic sensing [8, 9], etc. In the common approach that employs a laser beam to focus directly on a metallic tip in free-space optics to excite localized surface plasmons at. Liu et al.: An acousto-optic coupling approach to plasmonic nanofocusing the tip apex [17–20], the mismatch between the nanoscale tip apex and the microscale focal spot inevitably results in low efficiency and substantial background light. By coupling surface plasmons onto metallic tips via the grating carved on the shaft [21–24], the background noise can be solved, but the electric field enhancement is degraded [24]

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call