Abstract
In this study, Ti/TiO2/PbO2 anodes consisting of a PbO2 coating growth on the TiO2 interlayer deposited on titanium substrates were prepared combining different deposition technics: electrochemical method using anodization (Anod), electrodeposition (EL), and sol gel spin coating (SG). Different kinds of anodes have been tested for the removal of ampicillin, a pharmaceutical pollutant, from water. The structure and the surface morphology of the prepared multiple coatings were characterized by scanning electron microscopy and Energy-Dispersive X-ray spectroscopy respectively. Electrochemical impedance spectroscopy was also investigated in order to study the electrocatalytic activity of the anodes. The performance of the electrodes was evaluated through high performance liquid chromatography and chemical oxygen demand (COD) measurements. It was noticed that ampicillin could be mineralized by anodic oxidation process using Ti/TiO2/PbO2 anodes. The best results were obtained for Ti/TiO2SG/PbO2EL as anode with a 64% of COD removal after 300 min of treatment and a fast decrease in the amount of ampicillin was reached after almost one hour. Experimental results demonstrate that Ti/TiO2SG/PbO2EL anode presents the best ability for the degradation of ampicillin through anodic oxidation compared to the Ti/TiO2SG/PbO2SG and Ti/TiO2Anod/PbO2EL electrodes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
