Abstract

AbstractAchromatic devices have wide application prospects in radar and imaging fields. However, chromatic aberration and limited bandwidth restrict their development. Moreover, broadband and highly efficient achromatic devices working in transmission mode are still difficult to realize. In this paper, broadband highly efficient achromatic transmission in the microwave region by a metasurface is achieved. First, the ideal dispersion conditions of achromatic meta‐atoms are given. Then, a polarization selective grating metasurface and a split ring slot metasurface are designed using the transfer matrix method and equivalent circuit theory, respectively. The former is used to control phase characteristics while the latter enables controlling dispersion. Phase and dispersion can be controlled independently by cascading them and any phase curve can be designed as is desired. In order to verify the strategy, an achromatic deflector and an achromatic lens are designed and samples are fabricated. The experimental results show that the deflector can realize achromatic refraction from 9.3 to 12.3 GHz with average efficiency 77.5% and the lens can realize achromatic focusing from 9.8 to 12.2 GHz with average efficiency 78.9%, respectively. The experimental results are in good agreement with theory. The findings provide valuable strategy for achromatic devices design, which can be widely applied.

Highlights

  • Introduction fieldschromatic aberration and limited bandwidth restrict their development

  • We propose a novel strategy to realize highefficiency broadband achromatic transmission based on metasurface

  • We give the dispersion conditions to be satisfied by achromatic devices

Read more

Summary

Introduction

Chromatic aberration and limited bandwidth restrict their development. Broadband and highly efficient achromatic devices working in transmission mode are still difficult to realize. Broadband highly efficient achromatic transmission in the microwave region. In radar systems and imaging systems, chromatic aberration distorts the signal waveform caused by electromagnetic devices because the refractive index of electromagnetic materials varies by a metasurface is achieved. A polarization selective grating metasurface and a split ring slot metasurface are designed using the transfer matrix method and equivalent circuit theory, respectively. The former is used to control phase characteristics while the latter enables controlling dispersion

Methods
Results
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.