Abstract
Highly cost-effective shielding composite was prepared by vanadium slag, boron-rich slag and epoxy resin in this paper. WinXCOM program and 60Co gamma ray source were used to analyze the gamma ray shielding properties. Gamma ray irradiation for composite was tested with 60Co gamma ray irradiation field. Simultaneous DSC-TGA, electronic universal testing machine and scanning electron microscopy were used to analyze the material properties of composite. The HVL of all composites are nearly same for 60Co gamma ray, about 3.90cm at 1173keV and 4.15cm at 1332keV. Maximum resistance temperature of composites is about 230°C. Bending strength of all composites is nearly same and more than 10MPa. Composites have good resistance for gamma ray irradiation effect under 93.5kGy dose gamma ray.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
