Abstract
As an increasing number of wireless devices are introduced to our daily lives, long-term environmentally stable conductive fabrics that can shield against electromagnetic radiation are increasingly desired. Herein, conventional cotton and linen fabrics were dip-coated in additive-free, aqueous Ti3C2Tx MXene dyes, which consist of only two-dimensional Ti3C2Tx flakes dispersed in water, to fabricate highly conductive fabrics for electromagnetic interference (EMI) shielding. Ti3C2Tx loading and electrical conductivity of the fabrics increased with the number of dip-coating cycles. After only 4 dip-coating cycles, EMI shielding effectiveness (SE) of Ti3C2Tx-coated (<15 wt%) cotton and linen fabrics reached ∼40 dB over the X-band range. After 24 dip-coating cycles, the total EMI SE increased to ∼80 dB for Ti3C2Tx-coated cotton (54 wt%) and linen (48 wt%) fabrics, which is higher than commercial metal-based conductive fabrics tested in this study. The average EMI SE performance of Ti3C2Tx-coated cotton and linen fabrics only decreased by ∼8% and ∼13%, respectively, after storage under ambient conditions for two years. This work suggests an attractive alternative to current metal-based conductive dyes and provides valuable insights into the development of environmentally stable wearable EMI shielding materials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.