High Water Resistance and Luminescent Thermal Stability of LiyNa(2-y)SiF6: Mn4+ Red-Emitting Phosphor Induced by Codoping of Li.

Abstract

Mn4+-doped fluoride phosphors are efficient narrowband red-emitting phosphors for white light-emitting diodes (WLEDs) and backlight displays. However, erosion by moisture is the main obstacle that limits their application. In this work, LNSF:Mn4+ (Li0.06Na1.94Si0.94Mn0.06F6) with high quantum yield (QY), luminescent thermal stability, and waterproofness was synthesized using the H2O2-free reaction method at room temperature. Compared to NSF:Mn4+(Na2Mn0.06Si0.94F6), the QY value, luminescence thermal stability, and water resistance of LNSF:Mn4+ are obviously improved by codoping of Li+ because of the formation of charge-carrier transfer (CT) and rare-Mn4+ layer induced by codoping of Li+. The former produces the negative thermal quenching (NTQ) effect, which results in the improvement of the luminescent thermal stability. The latter can inhibit the hydrolysis of Mn4+ on the surface of the sample, which leads to the enhancement of waterproofness. The formation mechanism of the rare-Mn4+ layer is discussed. A prototype WLED emitting the ideal warm white light (CCT = 3173 K, Ra = 90.4) was assembled by coating a mixture of LNSF:Mn4+, yellow emitting phosphor (YAG:Ce3+), and epoxy resin on the blue light InGaN chip, indicating that the performance of the WLED can be improved by using LNSF:Mn4+.