Abstract

High space-bandwidth product with high spatial phase sensitivity is indispensable for a single-shot quantitative phase microscopy (QPM) system. It opens avenue for widespread applications of QPM in the field of biomedical imaging. Temporally low coherence light sources are implemented to achieve high spatial phase sensitivity in QPM at the cost of either reduced temporal resolution or smaller field of view (FOV). In addition, such light sources have low photon degeneracy. On the contrary, high temporal coherence light sources like lasers are capable of exploiting the full FOV of the QPM systems at the expense of less spatial phase sensitivity. In the present work, we demonstrated that use of narrowband partially spatially coherent light source also called pseudo-thermal light source (PTLS) in QPM overcomes the limitations of conventional light sources. The performance of PTLS is compared with conventional light sources in terms of space bandwidth product, phase sensitivity and optical imaging quality. The capabilities of PTLS are demonstrated on both amplitude (USAF resolution chart) and phase (thin optical waveguide, height ~ 8 nm) objects. The spatial phase sensitivity of QPM using PTLS is measured to be equivalent to that for white light source and supports the FOV (18 times more) equivalent to that of laser light source. The high-speed capabilities of PTLS based QPM is demonstrated by imaging live sperm cells that is limited by the camera speed and large FOV is demonstrated by imaging histopathology human placenta tissue samples. Minimal invasive, high-throughput, spatially sensitive and single-shot QPM based on PTLS will enable wider penetration of QPM in life sciences and clinical applications.

Highlights

  • High space-bandwidth product with high spatial phase sensitivity is indispensable for a single-shot quantitative phase microscopy (QPM) system

  • We demonstrate that pseudo-thermal light source (PTLS) can deliver single-shot phase imaging over large field of view (FOV) without sacrificing the spatial phase sensitivity and the temporal resolution with imaging speed limited only by the camera acquisition speed

  • PTLS offers many folds increase in space-bandwidth product (SBP) compared to white light (WL) source without sacrificing the spatial phase sensitivity and temporal resolution

Read more

Summary

Introduction

High space-bandwidth product with high spatial phase sensitivity is indispensable for a single-shot quantitative phase microscopy (QPM) system. High temporal and spatial coherence (SC) properties of laser light source (Fig. 1a) degrade the image quality due to coherent noise and parasitic fringe formation due to multiple reflections from different surfaces of the optical c­ omponents[5] As a consequence, it reduces the spatial phase sensitivity and height measurement accuracy of the system. High fringe density of the interference signal over the whole camera FOV cannot be obtained in case of low TC equipped off-axis QPM systems based on Linnik and Mach Zehnder interferometers (Fig. 1b,f). This overall reduces the SBP of QPM system due to coherence limited interference field of view (IFOV). The use of spectrally broad band light sources in interferometry systems requires dispersion compensation and chromatic aberration corrected optical c­ omponents[9,10]

Methods
Results
Conclusion

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.