Abstract
The mechanical and diffusion properties of Ti-Ta-Fe alloys in the Ti-rich region were investigated by utilizing a high-throughput method, with the combination of nanoindentation and diffusion couple techniques. Five groups of ternary Ti-Ta-Fe diffusion couples were prepared after annealing at 1273 K for 25 h. The composition-dependent mechanical properties of bcc Ti-Ta-Fe system were experimentally determined by means of nanoindentation and electron probe microanalysis (EPMA) techniques. Moreover, the interdiffusion coefficients of Ti-Ta-Fe alloys at 1273 K were confirmed from the composition gradients of the ternary diffusion couples with the support of a pragmatic numerical inverse method. A composition-dependent database on the mechanical and diffusion properties of Ti-Ta-Fe alloys was carefully established and utilized for the discussion of the processability during the hot working. The results indicated that the content of Fe should be controlled for the Ti alloys with high hardness and low Young's modulus.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Transactions of Nonferrous Metals Society of China
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.