Abstract
The main objective of this study is to investigate the characteristics of woody biomass conversion to syngas using a steam allothermal gasification process. The entering steam maintained at 877 °C and 1000 °C, respectively was used as the gasifying agent. A lab scale apparatus was built to perform the gasification experiment and the produced syngas was accurately analyzed using gas chromatography. The results clearly indicate that the syngas from steam gasification contains relatively higher H2 concentrations, and the heating values of the syngas reach 9–10 MJ/m3. A thermodynamic equilibrium thermochemical model that accounts for the deposition of solid carbon as a function of the entering steam temperature and the steam to biomass molar ratio was developed. The model was successfully verified by experimental results. Based on the results of model, an optimal range of the steam to biomass molar ratio is recommended.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.