Abstract
The microstructure and oxidation behavior of directionally solidified (DS) Nb–15Si–24Ti–4Cr–2Al–2Hf alloys with separate vanadium, tantalum, tungsten and zirconium additions were investigated by X-ray diffraction (XRD), electron probe microanalyzer (EPMA) equipped with wave-dispersive spectroscopy (WDS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) equipped with an energy-dispersive spectroscopy (EDS). Results show that the five alloys are all composed of primary (Nb,Ti) solid solution ((Nb,Ti)SS) phase and eutectic (Nb,Ti)SS/(Nb,Ti)5Si3 structure. After oxidation at 1250 °C for 100 h in air, the surfaces of the five alloys are covered by the oxides of Nb2O5, TiNb2O7, Ti2Nb10O29, TiO2 and amorphous SiO2. It is found that the alloying elements of V and W are detrimental for oxidation resistance and the addition of Ta has no obvious effect. Zr addition obviously benefits the oxidation resistance at high temperature, by decreasing the weight gain from 242.75 to 184.83 mg·cm−2. The oxidation mechanism of Nb–Si-based alloys and the effects of different alloying elements on the oxidation resistance of Nb–Si-based alloys were discussed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
