High-temperature oxidation behavior of laser additively manufactured AlCrCoNiSi-based high-entropy alloys at 1100 ℃

Abstract

High-temperature oxidation behavior of two laser additively manufactured AlCrCoNiSi-based high-entropy alloys (Al10 and Al15) are systematically studied in this work. These two alloys exhibit similar oxidation behaviors involving initial linear kinetics oxidation and subsequent parabolic kinetics oxidation at 1100 ℃. However, Al10 alloy has a superior oxidation resistance than Al15 alloy according to the oxidation rate constant. α-Al2O3 is the predominant phase of the oxide scales grown on both alloys. Cross-sectional views of the scales show that the scales consist of surface equiaxed grains and underlying columnar grains. For all oxidized alloys, a newly-formed fcc layer forms in the subsurface Al-depletion zone due to the preferential oxidation of aluminum. Al10 alloy exhibits a much thicker newly-formed fcc layer than Al15 alloy after the same oxidation time. This work ascribes the superior oxidation resistance of Al10 alloy to its thick newly-formed fcc layer, which suppresses the outward Al diffusion from the substrate to scale-metal interface by increasing the diffusion distance.