Abstract
304H stainless steel and a series of Ultra High Purity alloys selectively doped with C, C+P, C+S, C+P+S were used to investigate the conditions of intergranular cracking during simulated stress-relief heat treatment at 610°C. It was demonstrated that this cracking is caused by a synergy between sensitisation (intergranular carbide precipitation and formation of chromium depleted zone) and sulphur segregation, both enhancing grain boundary sliding. Auger spectroscopy measurements indicated (i) intergranular phosphorus segregation after heat treatment as opposed to (ii) sulphur segregation at internal cavity surfaces after high temperature slow strain-rate interrupted tests. Sulphur segregation to free surfaces was confirmed by “in situ” measurement at 600°C within the main Auger chamber. These results support the McMahon’s “dynamic embrittlement model” of intergranular cracking, where dynamic sulphur segregation plays a major role. Healing heat treatment at 800°C is proposed to decrease the stress-relief heat treatment susceptibility of high carbon austenitic stainless steels.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
