Abstract
High temperature 0, 5, 8 and 12 mol % Ho2O3–ZrO2 insulation coatings were successfully deposited on Ag and AgMg/Bi-2212 superconducting tapes using sol–gel technique for magnet technologies. With this purpose, transparent solutions were prepared from Ho and Zr-based precursor materials and then Ho2O3 effect on thermal, structural and microstructural properties were observed and discussed in the present study. It was found that Ho2O3 additive has a propensity to generate tetragonal ZrO2 and help to stabilize it. It was observed that insulation coatings with a mosaic structure having cracks were fully compatible with Ag/AgMg sheathed Bi-2212 tape substrates because of oxygen permeability, high and low actual temperatures and W&R process in comparison with the conventional insulation process. In addition, surface roughness decreased with increasing Ho2O3 content, thereby decreasing the grain size. Although porosity values vary considerably from one porosity mesurement expression to another, porosities of the insulation coatings can be estimated to be in the range of 3 and 30 vol %.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
