Abstract
Abstract This study aims at evaluating the erosion resistance at temperature of several hard coatings, including: CrC-NiCr by HVOF, Fe-based alloy by Arc Spray, NiCrBSiFe by powder flame spraying. These coatings are to be used for the recovery of highly eroded walls (above 10 mm thickness) of gray cast iron in the exhaust ducts in heavy-fuel engines. The erosion test consists of erosive particles thrown through a high temperature gas jet, for 5 cycles of 5 minutes, according to ASTM G211-14 (modified). Coated samples are subjected to a fuel gas-torch reaching a front temperature of 450ºC and a back temperature of 90ºC (water cooled), simulating the actual application. The eroded samples are characterized using EDS, and SEM. The results show the erosion rate of each material/system, and their corresponding erosion mechanisms. Thus, the results allows for the selection of an optimum coating for this surface recovery application.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
