Abstract
The high temperature deformation law of nitriding steel 25Cr5MoA over the strain rate range 0.001S-1~20S-1and temperature range 850°C to 1150°C was studied in the thermal simulation testing machine Gleeble-1500. Under a certain strain rate and a certain deformation degree, the flow stress decreased with the increase of deformation temperature. Work hardening of nitriding steel 25Cr5MoA was strong when the true strain was less than 0.2, otherwise the flow stress increased slowly, even dropped. High temperature deformation flow stress of nitriding steel 25Cr5MoA was influenced by the deformation temperature and strain rate. When the strain rate was 0.1S-1, true stress-true strain curve exhibited a dynamic recrystallization model, and with the increase of deformation temperature, peak flow stress shift left. When deformation degree was 0.69, the strain rate was 1S-1, and when deformation temperature was in the region of 850°C~1050°C, true stress-true strain curve exhibited a dynamic recovery model. And when the deformation temperature was in the region of 1100°C~1150°C, it showed a dynamic recrystallization model. Dynamic recrystallization diagrams of nitriding steel 25Cr5MoA were also established.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.