High-temperature behavior of polyvinyl alcohol fiber-reinforced metakaolin/fly ash-based geopolymer mortar

Abstract

Polyvinyl alcohol (PVA) fiber-reinforced geopolymer mortar is an eco-friendly construction material with excellent mechanical properties and durability. Visual observation, mass loss measurement, cubic and prism compressive tests, flexural tests, thermogravimetric and differential thermal analysis, scanning electron microscopy, and bubble parameter tests were conducted to evaluate the effect of PVA fiber and exposure temperature on the behavior of PVA fiber-reinforced geopolymer mortar after exposure to high temperatures. The PVA fiber contents were selected as 0%, 0.2%, 0.4%, 0.6%, 0.8%, 1.0%, and 1.2%, and the target temperatures were 25 °C, 200 °C, 400 °C, 600 °C and 800 °C. The results indicate that significant mass loss of the geopolymer mortar could be observed when the exposure temperature increased from 25 °C to 250 °C, whereas slight mass loss occurred from 250 °C to 700 °C, and no mass loss was detected from 700 °C to 800 °C. As the temperature increased, the geopolymer mortar gradually densified, while the geopolymer mortar continuously developed more cracks and pores. The compressive and flexural strengths of the geopolymer mortar improved as the temperature increased from 25 °C to 200 °C, but it decreased significantly as the temperature further increased to 800 °C. In addition, on exposure to 200 °C, the presence of PVA fibers significantly improved the cubic and prism compressive strengths and flexural strength by 50.5%, 29.4%, and 66.3%, respectively, compared with the geopolymer mortar without fibers. As the temperature increased above 200 °C, although the PVA fiber decomposed, the defects left by the melt fibers slightly influenced the strength of the geopolymer mortar.