Abstract

Ordinary mixers can hardly meet the requirements in terahertz (THz) communications due to the low-power and expensive THz sources. Sensitive harmonic mixers have been widely studied to avoid this problem, owing to the fact that the higher the number of harmonics, the lower the local oscillator (LO) frequency, and the lower the cost. High-Tc superconducting (HTS) Josephson junction (JJ) mixers are performing candidates for THz receiver frontends because of the advantages of excellent sensitivity, wide bandwidth, high harmonic number and low LO power requirement. However, the normal-state resistance of HTS JJ is so low that traditional antennas are difficult to match it. In other words, it is quite a challenge to match the input impedance to a low input impedance for traditional antennas, especially for antennas fed by coplanar striplines (CPSs). In this work, based on the structure of bowtie, two types of stub tuners were integrated to decrease the impedance of the bowtie antenna so as to improve the coupling efficiency between the traditional bowtie antenna and the JJ. Furthermore, HTS YBa2Cu3O7-δ (YBCO) JJ harmonic mixers coupled with the proposed structures and fed by CPSs are fabricated and measured. The measurements show that the JJ mixer coupled with a pair of open-end stubs of the bowtie antenna achieves up to 88 harmonics, with a conversion efficiency of −69.6 dB. In contrast, the JJ mixer coupled with a pair of lumped-element stubs of the bowtie antenna only attains to 30 harmonics, with a conversion efficiency of −73.4 dB. Additional numerical simulations indicate that the coupling efficiency is enhanced when the complex impedance of the antenna is explicitly considered. Compared with other coupled traditional antennas, the JJ mixer with bowtie antenna has the largest harmonic number. This work paves the way for the future application of low-frequency and low-cost LO for THz communications.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call