Abstract
A warm equal-channel angular pressing (ECAP) procedure was applied to a new Mg–6.5Y–1.2Er–1.6Zn (WEZ612)–0.5Ag alloy with a long-period stacking ordered (LPSO) phase. The microstructure, superplasticity, and deformation mechanism of the WEZ612–0.5Ag alloy were then systematically investigated. Three different precipitation phases formed in the alloy with trace Ag addition, namely LPSO, γ, and nanoprecipitate phases. A remarkable elongation of 726% was attained at 623 K and a strain rate of 0.01 s−1. The strain rate sensitivity index (m) and activation energy (Q) under these deformation conditions were 0.461 and 133.08 kJ mol−1, respectively. These m and Q values confirm that the primary deformation mechanism of the WEZ612–0.5Ag alloy at 623 K was grain boundary sliding assisted by lattice diffusion. The highly stable LPSO phases, γ precipitates, and nanoprecipitates synergistically improved the superplasticity of the alloy by retarding crack propagation and grain growth and by promoting the basal plane slip.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
