Abstract
Ultrasonic motors have some features; small size, lightweight, low speed-high torque, silence, and large holding torque. However, due to the friction drive and the need for switching about rotation direction, it is not easy to realize the fast response without overshoot. To overcome these issues, this paper heuristically proposes some practical control methods. At first, P/PI changeover for the position compensator is introduced to realize overshoot-less responses. Next, it is shown that the input shaping filter, which is introduced to improve the shape of positioning waveforms using the conventional input filter, desirably influences the settling time. Moreover, Bang-Bang control is implemented in the position loop to realize the fast positioning. Finally, combined control for the above techniques, i.e. fusion control scheme, is examined under the conditions with and without load torque. As a result, most fast positioning is realized in case that P/PI changeover, Bang-Bang control, and CW/CCW changeover with dead zone are mixed. Then successful positioning waveform is realized.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
