Abstract

High-speed p-i-n photodiodes for the spectral range of 1.2–2.4 μm are fabricated for the first time based on a GaAs/GaInAsSb/GaAlAsSb heterostructure with separated sensitive-(50 μm in diameter) and contact mesas, which are connected by a bridge front contact. The use of an unconventional design for the contact mesa with a Si3N4 insulating sublayer 0.3 μm thick under the metal contact made it possible to lower both the intrinsic photodiode capacitance and the reverse dark currents. The photodiodes have a low intrinsic capacitance of 3–5 pF at zero bias and 0.8–1.5 pF at a reverse bias of 3.0 V. The photodiode operating speed, which is determined by the time of increasing the photoresponse pulse to a level of 0.1–0.9, is 50–100 ps. The transmission band of the photodiodes reaches 2–5 GHz. The photodiodes are characterized by low reverse dark currents Id = 200–1500 nA with a reverse bias of U = −(0.5–3.0) V, a high current monochromatic sensitivity of Ri = 1.10–1.15 A/W, and a detectability of D*(λmax, 1000, 1) = 0.9 × 1011 W−1 cm Hz1/2 at wavelengths of 2.0–2.2 μm.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.