Abstract
In this work, we present the potential of high vacuum-compatible time-of-flight secondary ion mass spectrometry (TOF-SIMS) detectors, which can be integrated within focused ion beam (FIB) instruments for precise and fast chemical characterization of thin films buried deep under the sample surface. This is demonstrated on complex multilayer systems composed of alternating ceramic and metallic layers with thicknesses varying from several nanometers to hundreds of nanometers. The typical problems of the TOF-SIMS technique, that is, low secondary ion signals and mass interference between ions having similar masses, were solved using a novel approach of co-injecting fluorine gas during the sample surface sputtering. In the most extreme case of the Al/Al2O3/Al/Al2O3/.../Al sample, a <10 nm thick Al2O3 thin film buried under a 0.5 μm material was detected and spatially resolved using only 27Al+ signal distribution. This is an impressive achievement taking into account that Al and Al2O3 layers varied only by a small amount of oxygen content. Due to its high sensitivity, fluorine gas-assisted FIB-TOF-SIMS can be used for quality control of nano- and microdevices as well as for the failure analysis of fabrication processes. Therefore, it is expected to play an important role in the development of microelectronics and thin-film-based devices for energy applications.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
