High-Sensitivity Large-Throughput Broadband Tunable Microwave Wear Debris Sensing System

Abstract

A highly sensitive, large throughput and wide dynamic range (in the aspect of size and material type) broadband tunable microwave interferometer based rectangular waveguide wear debris detection system is presented. Passing of (non)ferrous and (non)conductive particles through the sensor, which causes inductance and/or capacitance changes, are detected as transmission signal variations of the system. We first demonstrate the sensing principle with the aluminum particle of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$800~\mu \text{m}$ </tex-math></inline-formula> and epoxy resin particle of 1 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sup> at 6 GHz. Then, the effects of particle size and flow speed are tested with aluminum particles ranging from <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$200~\mu \text{m}$ </tex-math></inline-formula> to 1.8 mm. The measurement results show that the system is able to measure particle sizes with known material and differentiate nonconductive particles from conductive ones. With the proposed data processing techniques, this system is capable of detecting as small as <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$76~\mu \text{m}$ </tex-math></inline-formula> particles within an 8 mm outer diameter tube. And with future improvements on sensitivity and particle material characterization, the proposed system has the potential to differentiate (non)ferrous and (non)conductive particles and measure their sizes as a real-time wear debris sensing devices for rotating and reciprocating machines.