Abstract
Singlemode polymer fiber Bragg gratings (FBGs) are etched down to a diameter of 30 $\mu{\rm m}$ to be used for high sensitivity tensile force measurements. The singlemode polymer fiber and the Bragg gratings are fabricated using the in-house fabrication facility. The fabricated cladding etched polymer FBGs are characterized for low value tensile force measurements and the sensitivity of the sensors is measured and compared with the theoretically estimated values. A sensitivity of 643 nm/N is obtained for the polymer Bragg grating with a diameter of 30 $\mu{\rm m}$ . A pressure sensor based on a singlemode polymer fiber grating is also demonstrated. Low pressure in the range of 290–790 Pa is measured and the observed sensitivity of the pressure sensor is 1.32 pm/Pa. Given the bio-compatible nature of polymer fibers, such as high sensitivity force and pressure sensors can find applications in bio-medical field where high sensitivity low value force/pressure measurements are required.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.