High selective reduction of nitrate into nitrogen by novel Fe-Cu/D407 composite with excellent stability and activity

Abstract

In this study, we develop a new composite material of Fe-Cu/D407 composite via using nanoscale zero-valent iron (nZVI) with copper deposited on chelating resin (D407) to remove nitrate from the water. The experimental results show that a remarkable nitrate removal and the selectivity of N2 are 99.9% and 89.7%, respectively, under the anaerobic conditions of Cu/Fe molar ratio of 1:2, pH = 3.0. Even without of inert gas and adjusting the initial pH of the solution, the removal rate of nitrate by Fe-Cu/D407 reached to 85% and the selectivity of nitrogen reached to 55%. Meanwhile, the Fe-Cu/D407 maintained preferable removal efficiency of nitrate (100% - 92%) over a wide pH range of 3–11. In addition, the removal rate of the drinking water, lake water and wastewater from the Fe-Cu/D407 is still very high and the reactivity of Fe-Cu/D407 was relatively unaffected by the presence of dissolved ions in the waters tested. Moreover, the synergetic effect of Fe, Cu and D407 in the composite Fe-Cu/D407 were well investigated for the first time according to the analyses of TPR, XPS and EIS. The catalytic mechanism and denitrification routes were also proposed.