Abstract
Oxide-nitride-oxide (ONO) layer structures are widely used for charge storage in flash memory devices. The ONO layer interfaces should be as flat as possible, so measurement of the nanoscale roughness of those interfaces is needed. In this study, quantification of an ONO film from a commercially available flash memory device was carried out with a pillar-shaped specimen using scanning transmission electron microscopy (STEM) and computed tomography. The ONO area contained only low Z- and low STEM-contrast materials, which makes high-quality reconstruction difficult. The optimum three-dimensional reconstruction was achieved with an STEM annular dark-field detector inner collection angle of 32mrad, a sample tilt range from -78° to +78° and 25 iterations for the simultaneous iterative reconstruction technique.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
