Abstract
Environmentally assisted cracking (EAC) initiation tests were carried out by subjecting Alloy 800 tensile specimens to 0.55 mol/kg SO42− solution, pH280°C 3, at 280 °C using slow rise-time cyclic loading and in-situ crack detection. EAC, intergranular corrosion (IGC), and pitting were observed. Transmission electron microscopy analysis revealed Ti- and Cr-rich oxides in cracks, and sulfur incorporated in oxide(s) or as sulfide compound(s). This oxide/sulfide film is likely impaired, producing a slip dissolution-type EAC mechanism. For pitting, only a nano-scale sulfur layer was identified at pit-metal interfaces. This high surface coverage of adsorbed sulfur limited oxide nucleation and accelerated metal dissolution.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
