High Resolution 2.5D PIV Measurements of the Flow Fields Generated by Small Fans

Abstract

Abstract The free jets of an axial and a centrifugal fan have been scanned by a specialized particle image velocimetry (PIV) set-up, which allows for volumetric scans of the time-averaged velocity field. Both of these fans have similar dimensions of approximately 70 mm x 70 mm x 25 mm. A classic PIV set-up was combined with a precise linear stage to move the fans through the laser fan beam in small steps, creating a dense array of measurement planes. Two components of the time-averaged velocity field are captured by the first 2.5D scan. Another scan, with the fan rotated by 90° about its outlet surface normal, captures the missing third velocity component. This article describes the details of the measurement set-up, and mentions measures concerning seeding, reflections, and calibration. In the signal processing stage, two independent sets of gathered image data have to be processed, producing two sets of velocity image frames. These are subsequently combined using gridded interpolation in order to obtain a 3D velocity field. Specifically devised software tools allow for a CFD-like analysis and visualization of the flow field. Typical parameters of the generated jets, like the spreading and rotation rates, are calculated from the measurement data and details of the outlet flow fields are investigated. The interpolated data are also used to analyze the influence of an assumed coarser measurement grid resolution on the results for the obtained outlet flow fields.