Abstract
A novel 2-D fluorescence imaging technique has been developed to visualize the thickness of the aqueous mass boundary layer at a free water surface. Fluorescence is stimulated by high-power LEDs and is observed from above with a low noise, high resolution and high-speed camera. The invasion of ammonia into water leads to an increase in pH (from a starting value of 4), which is visualized with the fluorescent dye pyranine. The flux of ammonia can be controlled by controlling its air side concentration. A higher flux leads to basic pH values (pH > 7) in a thicker layer at the water surface from which fluorescent light is emitted. This allows the investigation of processes affecting the transport of gases in different depths in the aqueous mass boundary layer. In this paper, the chemical system and optical components of the measurement method are presented and its applicability to a wind-wave tank experiment is demonstrated.
Highlights
While far away from air-water interfaces, trace gases in both phases are mixed by turbulence, the turbulent eddies cannot penetrate through the surface
A novel 2-D fluorescence imaging technique has been developed to visualize the thickness of the aqueous mass boundary layer at a free water surface
The invasion of ammonia into water leads to an increase in pH, which is visualized with the fluorescent dye pyranine
Summary
Universitat Heidelberg, Institut fur Umweltphysik, INF 229, 69120 Heidelberg, Germany Universitat Heidelberg, Heidelberg Collaboratory for Image Processing (HCI), Heidelberg, Germany Universitat Heidelberg, Institut fur Umweltphysik, INF 229, 69120 Heidelberg, Germany Universitat Heidelberg, Heidelberg Collaboratory for Image Processing (HCI), Heidelberg, Germany Universitat Heidelberg, Institut fur Umweltphysik, INF 229, 69120 Heidelberg, Germany Universitat Heidelberg, Heidelberg Collaboratory for Image Processing (HCI), Heidelberg, Germany Universitat Heidelberg, Institut fur Umweltphysik, INF 229, 69120 Heidelberg, Germany Universitat Heidelberg, Heidelberg Collaboratory for Image Processing (HCI), Heidelberg, Germany Universitat Heidelberg, Institut fur Umweltphysik, INF 229, 69120 Heidelberg, Germany Universitat Heidelberg, Heidelberg Collaboratory for Image Processing (HCI), Heidelberg, Germany. A novel 2-D fluorescence imaging technique has been developed to visualize the thickness of the aqueous mass boundary layer at a free water surface. The invasion of ammonia into water leads to an increase in pH (from a starting value of 4), which is visualized with the fluorescent dye pyranine. The flux of ammonia can be controlled by controlling its air side concentration. A higher flux leads to basic pH values (pH > 7) in a thicker layer at the water surface from which fluorescent light is emitted. This allows the investigation of processes affecting the transport of gases in different depths in the aqueous mass boundary layer.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of the European Optical Society-Rapid Publications
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.