Abstract
Owing to the denitrification behavior of Ti(C,N)-based cermets during the sintering process, nitrogen atmosphere sintering is essential for the fabrication of high-quality products. Disclosing the roles of the sintering atmosphere on the microstructure and properties of cermet is of significance. Herein, Ti(C,N)-based cermets were fabricated under six types of sintering atmosphere. Effects of sintering atmosphere on the microstructure, coercive force (Hc), specific saturation magnetization (Ms (%)), and mechanical properties of cermets were investigated. More rimless Ti(C,N) grains with increased fraction of black cores were formed with increasing the nitrogen partial pressure. Three types of gradient structure of cermets were confirmed caused by the different nitrogen activity at the liquid sintering state. Vacuum sintering induced the formation of thicker rims on smaller Ti(C,N) cores at the surface due to the low nitrogen potential, while fcc solid solutions rich in N was formed in nitrogen atmosphere. Vacuum sintered cermets showed the lowest Hc and Ms. (%) of 3.66 KA/m and 2.13%, owing to the denitrification process. High-quality Ti(C,N)-based cermets were achieved via the solid-state nitrogen atmosphere sintering, benefiting from the optimized core-rim structure, i.e. moderate thickness of rims and certain amount of black Ti(C,N) cores.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Refractory Metals and Hard Materials
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
