Abstract
High-quality GaN films with low dislocation density have been successfully grown on the c-plane specially treated surface of the sapphire substrate. The vapour phase epitaxy starts from the regions with no etched pits where there are some micro-sidesteps to help to nucleate and then spreads laterally with increasing V/III ratio to form continuous GaN films. The full-widths at half-maximum of the x-ray diffraction curves for the GaN films grown on the treated surface of the sapphire substrate in the (0 0 0 2) plane and the (1 0 −1 2) plane are as low as 208.80 arcsec and 320.76 acrsec, respectively, and the etch-pit density of those etched in molten KOH is reduced to 5.5 × 105 cm−2. The surface of the epilayer exhibits atomically smooth, whose root mean square roughness is found to be 0.2863 nm.The epilayer grown on the treated surface of the sapphire substrate exhibits excellent optical quality, in which the yellow luminescence is nearly invisible in the photoluminescence spectrum. Compared with the conventional epitaxial lateral overgrowth technique, the technology is much simpler and the crystallographic tilt can also be greatly decreased.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.