Abstract
In this work the use of high quality natural fibres as reinforcements was studied using the resin transfer moulding (RTM) processing technique. The fibres were unidirectional high quality Arctic Flax and the matrix was an epoxy resin. The mechanical properties of the composites were compared to conventional RTM manufactured glass fibre composites, traditionally retted UD-flax fibre composites and to the pure epoxy. The results from mechanical testing showed that the (50/50) high quality ArcticFlax/epoxy composite has a stiffness of about 40 GPa compared to the stiffness in pure epoxy of 3.2 GPa. The same composite has a tensile strength of 280 MPa compared to 80 MPa of the epoxy. RTM showed to be a suitable processing technique for natural fibre composites when high quality laminates are preferred.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
