Abstract
The quality enhancement of sputtering AlN has hampered a bottleneck that limits the further development and deployment of film bulk acoustic resonator (FBAR) filters. To address this bottleneck, a new two-step growth process integrating metal–organic chemical vapor deposition (MOCVD) and physical vapor deposition (PVD) technologies was carefully constructed to grow AlN films on Si substrates. It was found that both the crystallinity and the surface roughness were increased by more than double that of the one-step produced PVD AlN because of the MOCVD AlN buffer layer with smaller dislocations and grain boundaries. Afterward, using our 4-inch MEMS wafer process, high-quality AlN-based FBARs wafers were obtained accordingly with small full-width at half-maximums for two-step grown AlN(0002) X-ray rocking curves of 0.68°, showing that the Q-factor of FBARs with two-step grown AlN precedes FBARs with one-step grown PVD AlN by 57.6%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have