Abstract
In this article, a highly sensitive and compact microwave sensor with quality factor (Q ≈3000) is proposed for identifying and sensing liquid samples using a central gap ring resonator (CGRR). The high Q is a result of surface current redistribution. Our sensor is designed to operate at 2.5 GHz with an active gap region, where the sample flows, in which the electric field is at its maximum amplitude. The sensor was simulated, fabricated, and tested for a new application to identify the condition of oil used as a coolant and an insulating material in high-voltage transformers. The efficiency of oil in this application depends on its insulation capability and water content. Since both of these factors correlated with the oil's dielectric constant, the CGRR sensor showed very good sensitivity for detecting the ratio of water in oil from the measurements of Q change (and its link to the oil's breakdown voltage) involving fresh and used oil samples.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IEEE Transactions on Microwave Theory and Techniques
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.