Abstract
Tunable solid-state dye laser sample based on modified polymethyl methacrylate (MPMMA) with methanol co-doped with pyrromethene 567 (PM567) and Coumarin 440 (C440) was prepared. Tunable dye laser output wavelength from 546 to 594 nm was obtained in an oscillator-amplifier configuration. With the input seed laser energy being about 1.5 mJ, the highest dye laser output energy reached 113.9 mJ, and the corresponding conversion slope efficiency was 51.39%. To the best of our knowledge, the tuning range and narrow linewidth dye output energy is the best under the same condition so far. The linewidth for the seed laser and amplified laser were measured with the result of less than 0.2 nm. With the amplified medium being pumped at a repetition rate of 10 Hz with a pulse energy as high as 120 mJ (the fluence was 0.42 J/cm2), the laser output energy dropped to half of its initial value after approximate 43000 pulses.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.