Abstract
Sintered composites in the B6O-xdiamond (x= 0–80 vol%) system were prepared under high pressure and high temperature conditions (3–5 GPa, 1400–1800°C) from the mixture of in-laboratory synthesized B6O powder and commercially available diamond powder with various grain sizes (<0.25, 0.5–3, and 5–10 μm). Relationship among the formed phases, microstructures, and mechanical properties of the sintered composites was investigated as a function of sintering conditions, added diamond content, and grain size of diamond. Sintered composites were obtained as the B6O-diamond mixed phases when using diamond with grain sizes greater than 0.5 μm, while the partial formation of the diamond-like carbon was observed when using diamond grain sizes less than 0.25 μm. Microhardness of the sintered composite was found to increase with treatment temperature and pressure, and the fracture toughness slightly decreased. A maximum microhardness of Hv∼57 GPa was measured in the B6O-60 vol% diamond (grain size < 0.25 μm) sintered composite under the sintering conditions of 5 GPa, 1700°C and 20 min.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
