Abstract
For investigating high pressure sintering processes, numerical models can be used. This will demand material models which give realistic mechanical response throughout the whole parameter space of the actual process. As the pressures become higher, the material density approaches its full theoretical value and the elastic part of the material properties becomes increasingly important. In this investigation, Poisson's ratio was determined using ultrasonic pulse-echo measurements. A new elastic model and an improved plasticity model were implemented into a user-defined material subroutine in a finite element (FE) code. To experimentally investigate the load displacement response and pressure distribution in powder compacts during pressing, a pressure instrumented Bridgman anvil apparatus was used. Validation of the FE model was conducted against experimental data from pressing experiments using two different start densities. The results show that the simulation model is indeed capable of reproducing load–thickness curves and pressure profiles reasonable close to the experimental curves.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
