High Precision Coulometry of Commercial PAN-Based Carbon Fibers as Electrodes in Structural Batteries

Abstract

Carbon fibers have the combined mechanical and electrochemical properties needed to make them particularly well suited for usage as electrodes in a structural lithium-ion battery, a material that simultaneously works as a battery and a structural composite. Presented in this paper is an evaluation of commercial polyacrylonitrile-based carbon fibers in terms of capacity and coulombic efficiency, as well as a microstructural and surface evaluation. Some polyacrylonitrile based carbon fibers intercalate lithium ions, resulting in a similar capacity as state-of-the-art graphite based electrodes, presently the most commonly used negative electrode material. Using high precision coulometry, we found a capacity of around 250–350 mAh/g and a very high coulombic efficiency of over 99.9% after ten cycles, which is even higher than a commercial state-of-the art graphitic electrode evaluated as reference. The high coulombic efficiency is attributed to the very low surface area of the carbon fibers, resulting in a small and stable solid-electrolyte interface layer. A highly graphitized ultra high modulus carbon fiber was evaluated as well and, compared to the other fibers, less lithium was inserted (corresponding to approximately 150 mAh/g). We show that the use of carbon fibers as an electrode material in a structural composite battery is indeed viable.