High precision control of laser energy for laser-matter interaction studies.

Abstract

Precise, highly reproducible control of the laser energy is required for high confidence laser-matter interaction research such as in dynamic compression science and high energy density physics. The energy must be adjustable without affecting the pulse shape (time varying intensity) or beam smoothness. We have developed a convenient two-stage energy tuning method for a nominal 100J, 351nm (UV) laser. The energy is adjusted in 10J (10%) increments by operating the laser at full energy and inserting a beam splitter in the laser output. As the splitter is located after the final frequency tripling optics, the UV pulse shape is unchanged. The energy is varied by substituting a splitter of different reflectivity. For finer 3J (3%) increments, the infrared pulse is attenuated inside the laser before the final amplifier. This requires modest tuning to preserve the pulse shape. The demonstrated variation in shot-to-shot reproducibility is less than +/-2.5J (5% of the full energy), irrespective of the laser output energy. These approaches can be adapted to most ∼100J class lasers. We describe these techniques and show two examples where they have elucidated the underlying physics in laser shock compression experiments. One used only the beam splitters to establish the pressure for melting in iron. The other combined both techniques to finely increment the peak stress (∼2GPa steps) in germanium to precisely determine the onset and completion of melting-including the melting kinetics. These unambiguous results would not be possible without the developments described here.