Abstract
The stacked Blumlein pulse generators developed at the University of Texas at Dallas consist of several triaxial Blumleins stacked in series at one end. The lines are charged in parallel and synchronously commutated with a single switching element at the other end, In this may, relatively low charging voltages are multiplied to give a higher desired voltage across an arbitrary load. Extensive characterization of the stacked Blumlein pulsers indicates that these devices are capable of producing high-power pulses with rise times and repetition rates in the range of 0.3-50 ns and 1-300 Hz, respectively, using a conventional thyratron, spark gap, or photoconductive switch. This paper presents the progress in the development and use of these novel pulsers. Recent adaptation of the design has enabled the stacked Blumlein to produce 50-70 MW nanosecond pulses with risetimes on the order of 200-300 ps into nominally matched loads. The device has a compact line geometry and is commutated by a single photoconductive switch triggered by a low power laser diode.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have