High power density AlGaAs/InGaAs/GaAs PHEMTs using an optimised manufacturing process for Ka-band applications

Abstract

In this study, a novel manufacturing process for a 0.1μm T-gate is investigated for producing a high output power performance for the Ka-band frequencies using high-quality AlGaAs/InGaAs/GaAs pseudomorphic high electron mobility transistors (PHEMTs) on semi-insulated (SI) GaAs substrates. The gate manufacturing process is the most important process due to its intimate relationship with the DC and RF performance of the device. To improve the gate performances of PHEMT devices, we investigated various materials and processing approaches involving a wide gate recess, double exposure by e-beam lithography, and low-damage double-gate passivation methods based on plasma-enhanced chemical vapour deposition (PECVD). To reduce the sensitivity to current collapse effects, we investigate the relationship between the electrical characteristics of the PHEMTs and top and bottom gate-supported passivation films. To improve the ohmic contact performance, we test an AuGe/Ni/Au (200/30/120nm) ohmic contact metallisation scheme using the rapid thermal annealing (RTA) process at temperatures ranging from 450°C 30s. A PHEMT with a gate length of 0.1μm, exhibiting a maximum drain current density of 680mA/mm, a peak transconductance of 500mS/mm, a unity-gain cut-off frequency (fT) of 56GHz, and a maximum frequency of oscillation (fMAX) of 84GHz, is demonstrated using this novel manufacturing process; the Ka-band power performance includes an output power density of 2.4W/mm and a power-added efficiency (PAE) of 44.6%.