Abstract
The effect of Zn and Ti on the magnetic, power loss and structural properties of Li 0.5Zn x Ti x Mn 0.05Fe 2.45−2 x O 4 ferrites ( x=0.0 to 0.30 in step of 0.05)+0.5 wt% Bi 2O 3, prepared by standard ceramic technique, has been investigated. Complex permeability ( μ*= μ′− jμ″) has been analyzed at room temperature in frequency range from 1 to 10 3 MHz. It was found an enhancement in permeability with Ti and Zn concentration in Li 0.5Zn x Ti x Mn 0.05Fe 2.45−2 x O 4 and exhibits the maximum value 106 for x=0.20 sample. Complex permeability of these ferrites exhibits stable frequency response up to 7 MHz beyond which the real part decreases sharply and imaginary part increases to have a peak at the relaxation frequency. Power loss measurements have been carried out in induction condition ( B=10 mT) in frequency range of 50 kHz to 3 MHz. Power loss has been found to be quite low with the substitution of Ti and Zn in lithium ferrite.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have